Analyzer Characteristics

The ZY-S2015 Series water quality analyzer is an online monitoring instrument for total phosphorus indicators in surface water and discharged sewage. The instrument is based on the national standard or industry standard, and has the characteristics of simple operation, high degree of automation, easy maintenance, and low cost of consumables. The instrument is equipped with RS485/RS232 interface as standard, supports MODBUS protocol, and can monitor its operating status and data through remote communication. It can also be remotely controlled to realize remote analysis, remote calibration, remote cleaning and other functions.

Technical characteristics

1. Select valve components: select reagent sampling timing, flexible channels, variable functions, small dead volume, easy maintenance, and long life.
2. Micro metering components: the accurate metering of reagents is achieved through the visible photoelectric system, which overcomes the quantitative error caused by the wear and tear of the peristaltic pump tube; at the same time, the accurate quantification of trace reagents is realized, and each dose is only 1 ml, which greatly reduces the use of reagents quantity.
3. Sampling components: peristaltic pump negative pressure suction, there is always an air buffer between the reagent and the pump tube, which avoids the corrosion of the pump tube; at the same time, it makes the reagent mixing more concise and flexible.
4. Sealed digestion components: high-temperature and high-pressure digestion system speeds up the reaction process and overcomes the corrosion of equipment caused by the volatilization of corrosive gases in the open system.
5. Reagent tube: It adopts imported modified PTFE transparent hose, the diameter of which is greater than 1.5mm, which reduces the chance of water sample particle clogging.
6. Using Panasonic imported PLC and other control components, reducing environmental interference and equipment failure